If this is the problem, put the machine in reverse and try to extract the offending item. If your document has begun to get wrapped around the rollers.One of the most frustrating things that can happen when using a pouch laminator is experiencing the dreaded pouch jam. This will help prevent the device from becoming even more damaged. Don't feed bad - it happens. The easiest way to do so is by using a carrier each and every time you laminate.) If your laminator lacks this capability, call in a technician.Which brings us to our next point: preventing a jam in the first place. When there's no glue on the rollers, your chances of experiencing a pouch jam are drastically reduced. The carrier will prevent adhesive from coating the machine's rollers.
That will save you a lot of time - and frustration. Consult your instruction manual for more information on what you can laminated with your particular device. This often involves purchasing a new laminator.3. These jams can be difficult to deal with and they even have the capability to permanently damage your laminator. If this is your problem, once again, try to remove the document while the machine is in its reverse mode. Your machine isn't meant to deal with those kinds of things and often, the motor isn't tough enough to push the item through. First, stop the machine immediately by either turning it off or unplugging it.
Dealing with a pouch jam is annoying, but by following these tips, the experience will be easier. Just be sure to take good care of your new device. And, if you use a carrier, you can prevent a pouch jam from even happening. Pouch jams sometimes arise because people try to laminate items that have no business being laminated in the first place such as leather, flowers, and so on. This can be okay if your laminator can open up - some products that can do so include the Fellowes Plus, it will extend the life of your machine, which can save you money.
This can be caused by adhesive building up on the rollers.5. Also, some materials such as cardboard and foamboard can be too thick. (Just make sure you let the device cool off for a bit so you don't burn yourself. After your laminator is shut off, you can try to figure out what the problem could be. dyeing machine If your machine has a pouch jam lever, try using that instead. Trying to take care of the problem yourself can void the warranty and really damage the machine if you're not careful. If all of your best efforts have failed, you may be tempted to open up the machine yourself and remove your document. Finally, if the jam is especially bad, you might just have to admit defeat. This article will give you a few tips you can use when dealing with a jammed pouch and let you know how you can avoid this problem in the first place.
留言列表
